2008 EVINRUDE OUTBOARD Etec 300 hp SALTWATER SERIES

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

2008 EVINRUDE OUTBOARD Etec 300 hp SALTWATER SERIES :
$9950.00

OUTBOARD REBUILD

**REMANUFACTURED OUTBOARDS & POWERHEAD REPLACEMENT

SINCE 1972 - OVER 35 YEARS IN THE OUTBOARD FIELD

please contact us if you have 10 or less response before offerding or offer will be canceled

You are offerding on a 100% Remanufactured 2008 Evinrude E-tec 300 This motor has trim/tilt, 25\" shaft as you can see this motor is as clean as the day it was made.

These 2008 300 motors still blue book for $12900 average retail.. This motor is much nicer then average

Please do not confuse this motor with a used outboard. We have installed a fresh powerhead that comes with a 1 Yr replacement Warranty. Read blow to see exactly what had been done this this motor. Hurry up and offer motors this nice to not stick around long.. ALL purchases get FREE installation if you are able to come to our Western Pennsylvania Office. We will install the same day you come in.. in by 9am and you will be on the way home by 4pm SAME DAY.. this is around a $1000 savings .

Powerhead has zero hrs ..

LOW LOW SHIPPING.. We get an 85% discount that we will pass on to you, most all shipping does not exceed $250, if it does we will pay the difference.

WE ship nationwide or motor can be picked up in.. Pittsburgh Pa, Annapolis MD, Long Island NY , DeLand FL, Austin TX

In this day of internet outboards and so call remanufactered engines with there buzz bomb paint jobs and so called \"tune ups\". what are you getting ?? Was this motor sunk ? Was the engine patched back together ? Was the Engine run in saltwater ?

This is where we here at Outboard Rebuilder give you the piece of mind knowing that we have COMPLETELY REMANUFACTURED our engines, then back it up with a 1 year warranty!!! We have not found another \"used\" outboard dealer That will match our 1 year warranty!

ALL OUR REMANUFACTURED MOTORS 30hp to 250hp receive the same treatment whether it\'s a 1983 or a 2007 . Your as-new motor is completely machined by our ultra modern machines- no short cuts !!!

All cylinders machined and diamond honed
ALL surfaces machined then high pressure washed and cleaned,
ALL NEW pistons are precisely fitted and plateau diamond honed.
Crankshafts are remanufactured back to factory specs with
NEW bearings
NEW oil pump, fuel systems are completely cleaned in our ultrasonic cleaner then computer re-calibrated.
ALL Injectors are all ultrasonic cleaned / back flushed and new seals are installed
All electronics are inspected and tested as well as the trim system.
The lower unit gets disassembled then factory clearances are checked along with all internal parts then its reassembled with new seals and water pump.
New thermostats,
NEW BASE COAT CLEAR COAT paint
NEW decals
we run your motor under power in our outboard test cell and is put it a through a preliminary break-in so when you receive your motor it\'s ready to go boating

WE ARRANGE SHIPPING by Fed-Ex FREIGHT exclusively and the utmost care is taken to ensure you receive your motor in good condition. NO HIDDEN FEES!!

For shipping quote 877 983 2537

I wanted to show just a few of our testimonials that we have received in the past 35 years of rebuilding and selling remanufactured motors and powerheads:

Writing to tell Mike how thrilled I am with the outboard I purchased from Blackbird Motors. From the start it was obvious that Mike knows more about outboards than anyone else I\'ve spoken with, making me feel I was in good hands. His recommendation for the engine horsepower was spot on and the process was clean, easy and fast. It looks and runs like a new engine, breathing new life into my old Mako. Looking forward to many future boating seasons!

Rick HathawayLong Beach Island, NJ

It has been a pleasure doing business with you and Outboard Rebuild !!!

I could not use the additional parts that was sent with the motor and Dawn quickly credited my account.

It took four weeks to complete the fabrication of the off-shore bracket and installation of the Optimax 225. The motor break-in was started on Nov. 23, 2013 under the supervision of my mechanic. His assessment of the motor was stellar.

Thanks again
Happy Sailor Floyd

Hey Mike and Crew,

I just wanted to throw a little response your way after getting home with my \"New\" motor. YOU SAY THAT \"YOU STRIVE TO SEND OUT THE BEST PRODUCT AT A GREATLY REDUCED COST\" YOU HAVE DEFINITELY ACHIEVED THAT GOAL!!! I would just like to say that I was very impressed with your first class operation. You guys really have your game nailed down. Everyone there had a part to play and played it perfectly like a well oiled outboard! Anything positive that can be said about the business you are in applies to Ooutboard Rebuilder! 375 miles each way to your shop, $445.00 round trip in gas and killing my body with all the fast food along route 80 west was totally worth it! As long as you guys are up and running I really don\'t understand why anyone would buy a showroom motor when they can purchase one of yours and especially when you can\'t tell the difference between yours and a showroom motor. Awesome Prices, Awesome customer service and Awesome Quality!!!
Thanks so much, Louie G W. Milford, NJ

I bought a 1999 90 hp Rebuilt Johnson from you;s, 1-1/2 years later this motor runs like a brand new one. Power-more than a new motor, starts every time and I fish in very cold weather and heat, never shuts off once its running.
Right after I bought this motor it developed a miss, one call to these folks and I returned to be treated very nicely and the motor was fixed by replacing a part, NO CHARGE!

I will never buy a new motor as long as these nice dependable folks are rebuilding outboards, I would recommend Outboard Rebuild to anyone who needs a rebuilt, you will be treated well and end up with a better than new motor, My life depends on this motor to get be back to the dock and it has.
Thanks for a product keeps working and if I ever need motor help, you\'s have my business. (James R - PA)

Just a quick note to say thanks again for the excellent service. I installed the YAMAHA 90 on my boat and it has been used four times since. It runs better than ever. It is quieter and it has more power. A special thanks to Brian and Stan for the work they did. I won\'t hesitate to recommend you guys.
(Doug T - GA)

I just wanted to thank Mike Sr. and everyone for the help you guys gave me with the trim tilt on my 2000 Johnson 50 hp out board. You guys completely rock. I got everything back on the boat yesterday, bled and filled the trim tilt unit and took the boat out. Everything is working perfectly. Thank you all again. I am recommending you to everyone I talk to who is looking to buy an outboard.
(Steve - FL)

Awesome rebuild! (Yamaha 225 VMAX) Better than when Brad bought the boat. We went out Tuesday and broke the motor in. It runs smooth as silk, better than when it was new. (Bill - Greenville, SC)

I bought a 1998 Mercury 150 EFI from your company in June of 2007, This engine has run like a top from day 1. I have sent three of my Blass Club friends up to have rebuilds done and all three used your \"while you wait\" service (in by 9 out by 4) and so far Outboard Rebuild is batting 1000.
I just wanted to say thanks again. (RF - New Rochelle, NY)

Last year you guys rebuilt the powerhead on my 1993 Johnson 115. I take the boat out weekly and have not had a problem at all with the rebuild even after putting over 100 hours on the motor.
Mike, Jr and the ladies in the office were very helpful during the whole process. Thanks! (SG - Dry Prong, LA )

I may have had some anxiety in purchasing my Remanufactured OptiMax 225 sight unseen 6 months ago, but it has met all the claims Outboard Rebuilder makes and it\'s exceeded my expectations after 50+ hours of off shore operation. It runs like new (strong and dependable)! Your recomendation of using Terry in Deland as an installer worked out great as well. He knowledge is vast and work is quality. I appreciate Mike keeping his word in all transactions like sticking to the trade-in-price on my old motor. I will surely recommend your product to all friends and associates.
Thank You. (JT - Clearwater, Ooutboard Rebuilder for the rebuild on my 2002 175 Johnson outboard this thing is faster then ever. We got to there shop at 9am for a complete rebuild( wile you wait ) Dan had our powerhead off in 30min , 5 hrs later i was heading home to Maryland with a complete rebuild. It has been 7 months and this motor is smooth and FAST we took mike\'s advice and had them do the mild mod\'s and man am i glad this picked up 400 rmp. from 5500 to now 5900, this thing will run with 225\'s all day long!! Ray from Baltimore, MD

THE BEST, what else needs to be said, AAA+++, Unbeatable service and price!!!

2007 300ProXs Mercury High Performance 20 Bad Boy (#160405270097)
US $9,000.00 More Positive response:
The Johnson 90 hp runs as smooth as a brand new motor. You guys really know how to rebuild a strong outboard, it pushes our 24ft. pontoon three times faster than the old 60 horse Merc. that originally came with the boat. We are very satisfied with your product and service. (TB- Henderson, NV)Testimony from a valued customer:
Sent my sick 1997 Force/Merc 120 to One Outboard for a Power Head Overhaul. Two weeks later without hesitation my Power Head was returned in the same pallet I sent (which I requested) the head cleaned, overhauled and ready to go. I installed this the same day and had a Marine Mechanic assist in the rigging. Started up first attempt and it sound awesome. Had it on the water for a ten hour break- in within two weeks. Now have about 40 hrs on it and running like a champ. I would recommend Outboard rebuild to everyone who has a problem with their engine or power head. Thanks to Mike and his knowledgeable crew and customer service I’m enjoying South Texas clear water and outstanding fishing. (RB- DelRio, TX)Hard to believe that you would go anywhere else .In the past we have sent motors to Texas, Fl ,Georga even the factory rebuilds was really getting discuraged with the whole rebuild thing . Four years ago we started to use Blackbird for our motors ,What a difference. They go out of their way to help us ,their service is great our rental business dosent have near the down time....Rob, Erie boat rental, Erie PaMy experience dealing with Mike DeMayo and his company was a good experience. I bought a pair of 2003 225 optimax motors and was very pleased with the price, service and installation. They did a very good job re-rigging and setting up the new smart gauges and controls. I towed over 320 miles one way and it was definitely worth it. Thanks to Mike and his guys.
---D ScrivenerI am 100% happy with the 2007 Mercury ProXS 250 powerhead rebuild mike and his guys did for me, It has only been 11 months but if power is any sign to how long this rebuild will last im good to go.. I have picked up 300rpm and close to 3 mph from before the motor broke.

On a side note:

I called mike on a Monday and he got me in his shop by Wednesday the same week and had me back up and running for no extra cost !! So i thought the least I could do was post this thank you to him and his guys..

Tony A , Marietta, Ga