ANCEL AJ600 6 Cylinder Ultrasonics Fuel Injector Cleaner Injector Nozzle Tester


ANCEL AJ600 6 Cylinder Ultrasonics Fuel Injector Cleaner Injector Nozzle Tester

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

ANCEL AJ600 6 Cylinder Ultrasonics Fuel Injector Cleaner Injector Nozzle Tester:
$465.99


ANCEL AJ600 6 Cylinder-Ultrasonics Fuel Injector Cleaner Injector Nozzle Tester

Description:

ANCEL AJ600 6-Cylinder 110V injector cleaner & tester uses ultrasonic technology and microprocessor fuel pressure control cleaning and testing technology to quickly remove carbon from the vehicle fuel system, and test leaking, uniformity, inbreath of injectors, so that the injectors can discharge fluid more quickly. Fuel Injector Tester & Cleaner is a professional 6 cylinders auto fuel injector testing cleaning machine. It is equipped with a pressure gauge which can make the test more precise and easier.Perfectly suit for removing carbon from gasoline cars and motorcycles fuel system, testing leaking, cleaning spark plug, testing injection of injector.
However , NOT for diesel injectors. It also can be used for cleaning and testing four injectors at the same time.

Product Functions:

Injector resistance test
Full test for low resistance injectors
Side feed injectors support (With Optional Spare Parts)
Ultrasonic cleaning
Uniformity & Sprayability test
Leakage test
Injecting volume test
Working modes test
On-Vehicle cleaning


Function Explanation:

Injector Testing

This function is to detect the atomization, dripping, blockage, fuel injection angle status of the fuel injectors and the size and balance of the fuel injection of each fuel injector at different speeds.

Ultrasonic cleaning:
The cleanser added into the ultrasonic cleaner just soaked the injectors’ needle is suitable.
Before the ultrasonic cleanser is added into ultrasonic cleaner fluid, do not turn on the ultrasonic cleaner. Otherwise, damage may be incurred.
Strictly prohibit to put the pulse signal cable or its connecter into the cleanser, otherwise damage will be incurred.
The continue work time of the ultrasonic cleaner don’t be more than 30min, otherwise it will shorten the life.
Not in using, please put out the power plug.

Uniformity/Sprayability Test: Under this function, the parameters of RPM, PW and time can be adjusted in real time.
Leakage Test: Under this function, the parameter of fuel pressure can be adjusted in real time.
Injecting Flow Test: Under this function, the parameter of fuel pressure can be adjusted in real time.
Auto. mode Test: Under this function, the parameter of fuel pressure can be adjusted in real time.

Features:
1. [Fuel Injector Tester & Cleaner]:ANCEL AJ600 can be used both for cleaning and testing injectors. Perfectly suited for removing carbon from your fuel system, testing leaking, sprayability and testing fuel injectors in different situations.

2. [Hi-tech Ultrasonic Cleaning]:Built-in Ultrasonic mechanism. Different from the traditional way, it works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes it more thoroughly.

3. [Efficient & Labor-free]:4 injectors can be tested and cleaned at one time. Support reverse cleaning & on-vehicle cleaning. Plus, it can also be used on 6 cylinders, twice tests will do.

4. [Portable & Durable]:Tool trolley makes it more convenient to operate. Equip with high-quality pump, which makes it more endurable.

5. [3-YEAR WARRANTY]:For damage caused by non-human factors,ANCEL AJ600 promise to resend parts for free within 3 years. For any needs, you are warmly welcome to contact us and we will get back to you ASAP within 24 hours.

Highlights:

1. Fully supported
This equipment supports testing of various injectors, including Bosch, Denso, Delphi, etc. Support long injector detection, such as Mercedes-Benz and BMW.

2. Resistance Test
Support the resistance measurement of the fuel injector to know the performance status of the fuel injector.

3. Quick Disassembly
The special structure design makes the disassembly and assembly of the fuel separator more efficient and quicker.

4. Portable Small and Lightweight
The device is very small and light and easy to move. It is currently the smallest full-function test equipment for injectors.

5. Strong Cleaning
The machine has a strong ultrasonic cleaning ability, which can remove carbon deposits and impurities on the fuel injection nozzle to the greatest extent.

6. Humanization Design
Adopting humanization design can make the system pressure fast restored to the default values.

7. 6-Cylinders Ultrasonic Cleaning

Fit for 99% Vehicles & Motorcycles :

ANCEL AJ600 supports for 99% of vehicle models, and it fits for most petrol cars and motorcycles injectors, but NOT for diesel injectors.

Support for Audi, for Australia Ford, for Benz, for BMW, for Brilliance, for Chevrolet, for Chevy, for Chrysler, for Citroen, for Dacia, for Dadi, for Daewo, for Daihatsu, for Demo, for Fiat, for Ford, for GM, for Holden, for Honda, for Hyundai, for Isuzu, for Jaguar, for Kia, for Lancia, for Land Rover, for Mahindra, for Maruti, for Mazda, for Mitsubish, for Nissan, for Opel, for Peugeot, for Porsche, for Renault, for Romeo, for Rover, for Saab, for Seat, for Skoda, for Smart, for Subaru, for Suzuki, for Tata, for Toyota, for Volvo, for VW, for Yamaha,etc.

Easy Operation:

1. Clean injector\'s outside with gasoline or cleaning liquid before turning on the machine
2. Putting injectors in ultrasonic bathtub after the outside of injector is free of dirt.
3. Turn on ultrasonic system, allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors.
4. Fix injectors on the machine
5. Test injectors for resistance, shorts, and current draw
6. Perform leak test, spray pattern, and flow rate testing on flow bench.
7. The injectors are now returned to the flow bench for retesting of all functions.

Specifications 1.Main unit power supply:AC220V±10% 50Hz/60Hz or AC110V±10% 60Hz 2.Input power: 230W 3.Ultrasonic cleaner power: 100W 4.Simulated RPM range:100~9900rpm, step:10rpm 5.Time range: 5~300s, step:5s 6.Pulse width: 0.1~25ms,step: 0.1ms 7.Fuel tank capacity: 3.3ml 8.Work pressure: 0-7bar

About the cleaning liquid and testing liquid:
1.What liquid I can use for the checking ?
Test liquid:Inedible alcohol.
2. What liquid for the cleaning mode of this machine?
Special injector cleaning liquid,such as 3M injector cleaning liquid.

Why do we have to clean injectors?

When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls. Gasoline is easy to volatile, but wax and varnish stayed. Heat these wax and varnish day after day,they will change into hard coke. The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel.

Tips:Do not get any cleaning solvent on the outside of the vehicle, as this will damage the paint. A heavily clogged fuel injector may not allow enough cleaner to pass through during a routine cleaning, so it will not be adequately cleaned. Additional cleaning may be needed to clear heavy deposits.

PaymentShippingTerms of salesAbout usContact usPayment

- We accept all common forms of payment such as Credit cards、Debit card ,Google Pay ,Visa etc.

- Please contact us if you need to use another method to pay.

- Payment should be made within 7 days after offerding ends. Otherwise a Unpaid Item case will be opened to you.

Shipping

Will usually ship within 1 business day of receiving cleared payment.1. Ship from USA local warehouse via UPS or USPS shipping . Delivery time varies from 2 to 5 business days.2. We will ship according to your address. Please make sure it is correct and include phone number for delivery.

3. Ship to HI, PR, AKand other overseas states and other countries requires payment of courier fees.

4. PO.BOX address delivery is not supported.

- We are not responsible for buyers’ local taxes.

If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.

Terms of sales

We are authorize distributor, our all items are 100% original and Our devices have warranty,

- 12 months free repair for the devices.

- 60 days free return service .

- About return . Select the reason for the return 【Didn\'t like item】or 【Ordered by mistake】, then we will upload the return label , you will can get a full refund faster.

Please contact us firstly when you need warranty service and free return service .

In case an item arrives faulty, please contact us in 30 days and keep it unused.

We will instruct you on how to return and get refund or replacement.

If after 30 days, or the item has been used, we have the right to decline your claim.

Items should be returned on buyers’ cost for repair or replacement.

About us

WHO WE ARE?
We are authorize distributor for many manufatcurers. We guarantee all items are 100% original .

WHAT WE HAVE?
We have over 4 warehouses that are located in US. Fast delivery .

WHAT WE SELLING ?
We is mainly deals in various types of professional car diagnostics scanners and other car service maintenance tools.

For example --- Passenger car scanner , Diesel Commercial scanner ,Motorcycle scanner , Mile-agecorrection tool , Key programming tool , Smoke test , Electrical system probe test ,Battery tester ,injector cleaner etc .

Contact us

Our customer-oriented service strives for positive responses with all 5 star selling ratings.

Please feel free to contact us via message once you have any question before you giving us negative response or open case.

We will reply in 24 business hours.

Business time: GMT8 (9:00-18:00) from Monday to Friday.

On Jul 17, 2023 at 03:22:57 PDT, seller added the following information:


ANCEL AJ600 6 Cylinder Ultrasonics Fuel Injector Cleaner Injector Nozzle Tester:
$465.99

Buy Now