Crossflow Cylinder Head, Austin Healey Sprite MG Midget

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Crossflow Cylinder Head, Austin Healey Sprite MG Midget:
$1099.95

martingf Store

align=\"left\">Please Note: We will be very happy to help you decide if this is the right Automotive Part for you.
Email us at call. We will also be happy to provide technical support on all of our products. Installation services upon store

Our Inventory on this exciting new head is limited as there has been a huge demand for them andour metal foundry can not product this head fast enough to fill all orders. We suggest contacing us prior to ordering to make sure we have this item in stock.
You cancheck our inventory stock by clicking here to email us at align=\"left\">

Introducing the new....... Classic Car Performance
Crossflow 7-PORTCYLINDER HEAD
for the 1275cc \"A-SERIES\" BMC motor
Made of Lightweight Aluminum Alloy
Two Weber DCOE carbs or EFI Throttle bodies connect directly to this head.
Recently Developed and tested! Already over 250 in use.

Your stock or performance exhaust header is compatible to this head!Amazing Power and Torque!
A Serious Performance Head-In-A-Box!Fits:
MG Midget 1275cc,Austin Healey Sprite 1275cc,Austin Morris Mini Cooper 1275/1300 cc and other A series engines.Option #1 - Alloy Crossflow 1275 head with guides and seats installed. We refer to this as a
\"Bare Head\" without valves/springs installed
Option #2 - (very popular): Buy this head from us with Valves and Springs installed
(find in our other items)
Option #3 - (best value): Order this head assembled with valves/springs, two jetted Weber DCOE 40mm carbs, and linkage kit. Can be found in our other items.
This is an sale for a Brand-New-In-The-Box BARE A-Series Performance Alloy CROSSFLOW Cylinder head. This head is sold in three ways though our different items: This listing is for a bare head

BARE HEAD AS ABOVE WITH STUDS, NUTS, WASHERS, HEATER VALVE BOLTS, CARB MOUNT GASKETS - $1099.95 USD
Fully ASSEMBLED WITH VALVES, SPRINGS, RETAINERS, SEAT, WASHERS, COMPLETE ASSEMBLY (plus bolts, studs, and mount gaskets) - $1269.95 USD
Fully assembled with valves and springs and with TWO Jetted Weber DCOE 40mm carbs and Weber linkage kit. - $2249.95 USD (everything)

OK, What you see here is a professionally developed Crossflow head for the popular A-series 1275/1300 head. Made in the USA. It is similar to crossflow heads that were available back in the 60\'s but it is made of lightweight aluminum alloy rather than Cast iron and the design has been much improved. This head was created using gas-flow porting technology and the results have been spectacular. What is nice about this head is that it allows you to use your existing exhaust system unlike other heads of the past. It is designed for simple installation and will fit in the cramped engine bay of the MINI when fully assembled with webers. The mounting flange accepts to Weber DCOE or equivalent carbs. They bolt right on with the included studs and nuts. As mentioned above, this head comes from us three different ways and the later two are most popular. We do not recommend oversized valves as this head flows air so well, using large valves has proven to be counter-productive on an engine dyno. We guaranty your satisfaction!
These light-weight (15 lbs.) high strength aluminum alloy cylinder heads run cooler, allow higher compression ratios, and have extremely increased flow rate over stock heads. Heads come with silicon-bronze valve guides and hardened valve seats. Standard size 1275 valves, springs, and retainers are used or recommended. Autolite #4303 spark plugs are recommended. Significant cooling is achieve which is through better heat transfer and coolant flow. This is extremely valuable in the cramped engine bay of a mini.SPECIFIC TECH INFO:BARE HEAD WEIGHT: 15 LBSINTAKE VALVES: 1.3 IN *if ordered
EXHAUST VALVES: 1.15 IN * if ordered
COMBUSTION CAMBER: 23cc9 bolt head with drill-out option for 10 or 11 bolt heads (such as cooper S)Required items: Head Gasket Set, standard fuel tubing and clamps
Optional items: Fuel pressure regulator, Air Cleaners, Weber Top-mount Linkage
We have most of the above available in our other listingsEmail any questions at: or call Dave. Buy here and save a bundle! Satisfaction guaranteed- seeour 100% POSITIVE response! Technical support available straight from the manufacturer as well as warranty protection. Will be shipped with all info. Happy offerding!

WE WILL SHIP ANYWHERE IN THE WORLD. INTERNATIONAL BUYERS MUST USE PAYPAL FOR FASTER AND EASIER TRANSACTION. ALL PAYMENTS DUE WITHIN 10 DAYS.

Ialsostock WEBER carburetor conversion kits, Alloy cylinder headsand Gear reduction starters for many British applications. Assembled here in the USA! Email to inquire.
Please look at our other sales!

Shipping

Worldwide Shipping and Handling by USAirmail, Always just $109USD.

Shipping to Canada $45USD by US airmail

Domestic Shipping and Handling $29.95- UPS and USPS

Click Here to Email usto inquireabout website information where there is technical info for your reference purposes.

Please Look Below!!!

Westock innovative parts and accesoriesfor many Britishvehicles. They are all available on at PRICES!

Click here to look at our other listings!

Dayton Wire Wheels -The Best Wire Wheels in the World! Knock-off caps and some splines kitstoo!

Car Capsule Storage Systems: Available in outdoor and indoor versions

Standard replacementAluminum alloyand crossflow cylinder heads.

Premium Gear Reduction Starters from BRITISH STARTERS

Crossdrilled Rotors, Stainless Brake Lines, 4-piston Caliper Kits, Rear Disc Brake Conversions

Barn Finds from British Barn Finds

Premium Roller Rocker Sets

Click here to look at ouritems!