Technics SU-7300 Vintage Amplifier; FOR REPAIR: One channel out, otherwise works


Technics SU-7300 Vintage Amplifier; FOR REPAIR: One channel out, otherwise works

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Technics SU-7300 Vintage Amplifier; FOR REPAIR: One channel out, otherwise works:
$36.00


This is a great looking amp FOR REPAIR. All switches and dials work. The VU meters both work (and light up).
I\'ve owned this vintage amp (mf ~1979) for a couple of years. For the majority of the time the left channel was working; recently it died. The right channel still works. While both were working it both sounded great and was loud. I don\'t have the time (or skills) to replace the caps, and haven\'t yet found a nearby service tech who is affordable. Service manual is here: - this might be a cheap repair.
There\'s a few dings - most noticeably, the wood veneer has a chunk taken out of it at bottom left at the front (seen in pic) and there\'s a small scratch at the back right of the top. As you can see in the photos, the front panel could use some stainless steel cleaner (what I had on hand wasn\'t enough to lift the couple small blotches) but otherwise looks stunning.
Packed carefully with bubble wrap and polystyrene beads, this will arrive at your door looking just as beautiful as it left mine.
Power output: 41 watts per channel into 8Ω (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.08%Damping factor: 40Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 78dB (MM), 97dB (line)Output: 150mV (line)Speaker load impedance: 4Ω to 16ΩDimensions: 441 x 146 x 334mmWeight: 9.1kg

Technics SU-7300 Vintage Amplifier; FOR REPAIR: One channel out, otherwise works:
$36.00

Buy Now